Skip to content
GK24
Computer AwarenessMedium

Which of the following lists the layers of a coaxial cable correctly, from the centre outwards?

  1. A.Braided shield, copper conductor, insulator, plastic jacket
  2. B.Copper conductor, insulator, braided shield, plastic jacket
  3. C.Insulator, copper conductor, plastic jacket, braided shield
  4. D.Plastic jacket, braided shield, insulator, copper conductor

Correct answer

B. Copper conductor, insulator, braided shield, plastic jacket

Explanation

The correct answer is B, copper conductor, insulator, braided shield, plastic jacket. A coaxial cable is built around a single solid or stranded copper wire at the axis, which carries the signal. Around it lies a dielectric insulator that holds the conductor exactly in the centre and sets the electrical properties of the cable. Over that comes a braided or foil metal shield, which acts as the return path and keeps external interference out. The outermost layer is a tough plastic jacket that protects everything from moisture and damage. The name coaxial comes from the conductor and the shield sharing one axis. Option A puts the shield at the centre, option C puts the insulator first and leaves the shield outside the jacket, and option D is simply the correct order reversed, describing the cable from the outside inwards. The usual connector for this cable is the BNC.

Read the full article: Data Communication and Transmission Media: Notes

View all
Q3.Computer AwarenessAsked in: Uttar Pradesh · 22 March 2022Hard

Five channels each with 100 kHz bandwidth are to be multiplexed together. What is the minimum bandwidth of the link, if there is a need for a guard band of 10 kHz between the channels to prevent interference?

  1. A.500 kHz
  2. B.540 kHz
  3. C.460 kHz
  4. D.560 kHz
Show answer
Correct answer: B. 540 kHz

In frequency division multiplexing each channel is given its own slice of the frequency band, and a small unused strip called a guard band is left between two neighbouring channels so that one does not spill into the next.

Q4.Computer AwarenessEasy

An optical fibre transmits light along its length on the principle of

  1. A.Diffraction
  2. B.Total internal reflection
  3. C.Polarisation
  4. D.Dispersion
Show answer
Correct answer: B. Total internal reflection

The fibre has a core of higher refractive index surrounded by a cladding of lower refractive index. Light that enters the core and meets the boundary at an angle greater than the critical angle is reflected entirely back into the core, with none of it refracted away into the cladding.