Five channels each with 100 kHz bandwidth are to be multiplexed together. What is the minimum bandwidth of the link, if there is a need for a guard band of 10 kHz between the channels to prevent interference?
- A.500 kHz
- B.540 kHz
- C.460 kHz
- D.560 kHz
Correct answer
Explanation
The correct answer is B, 540 kHz. In frequency division multiplexing each channel is given its own slice of the frequency band, and a small unused strip called a guard band is left between two neighbouring channels so that one does not spill into the next. Five channels of 100 kHz each need 500 kHz. Guard bands are needed only in the gaps between channels, and five channels placed side by side have four gaps, so four guard bands of 10 kHz add 40 kHz. The total is 500 plus 40, that is 540 kHz. Option A, 500 kHz, is the answer of a candidate who forgot the guard bands altogether. Option D, 560 kHz, comes from using five guard bands instead of four, the classic fencepost mistake of counting gaps as if they equalled the number of items. Option C, 460 kHz, wrongly subtracts the guard bands instead of adding them. Remember the rule: for n channels there are n minus 1 guard bands.
Read the full article: Data Communication and Transmission Media: Notes
Practice Questions
View allThe material used for making optic-fibre cable in general is
- A.Copper
- B.Aluminium
- C.Steel
- D.Transparent plastic
Show answer
An optical fibre carries information as pulses of light, not as an electric current, so its core and cladding must be transparent and not conducting.
Read the full explanation →In the case of an optical fibre transmission link, LEDs and LASERs are used as
- A.Detectors
- B.Sources
- C.Repeaters
- D.Amplifiers
Show answer
At the transmitting end of a fibre link the electrical signal must be turned into light, and the two devices that do it are the light-emitting diode and the laser diode.
Read the full explanation →An optical fibre transmits light along its length on the principle of
- A.Diffraction
- B.Total internal reflection
- C.Polarisation
- D.Dispersion
Show answer
The fibre has a core of higher refractive index surrounded by a cladding of lower refractive index. Light that enters the core and meets the boundary at an angle greater than the critical angle is reflected entirely back into the core, with none of it refracted away into the cladding.
Read the full explanation →Which transmission medium is completely immune to electromagnetic interference?
- A.Unshielded twisted pair
- B.Coaxial cable
- C.Optical fibre
- D.Radio waves
Show answer
Electromagnetic interference acts on moving charge, so any medium that carries a signal as an electric current can pick up noise from motors, fluorescent lamps, lightning and nearby cables.
Read the full explanation →A walkie-talkie is an example of which mode of data transmission?
- A.Simplex
- B.Half-duplex
- C.Full-duplex
- D.Parallel
Show answer
A walkie-talkie allows both parties to speak and both to listen, so communication is two-way, but the set has a single push-to-talk switch and one person must release it before the other can be heard.
Read the full explanation →