Skip to content
GK24

SSC CHSL GK Questions 2026

Static GK decides the General Awareness score in SSC CHSL. Of the 25 questions in Tier-I and the 20 in Tier-II, most come from Indian Polity, History, Geography, the Economy and General Science, the areas the CHSL 2026 notice lists as History, Culture, Geography, Economic Scene, General Policy and Scientific Research relating to India and its neighbouring countries. The level is that of Class 12, so the questions are direct: which article, which river, which ruler, which year. Polity asks about parts and schedules of the Constitution, fundamental rights, the President, Parliament, the Supreme Court and constitutional bodies. History covers the Indus Valley, the Mauryas and Guptas, the Sultanate and Mughal periods, and the freedom struggle from 1857 to 1947. Geography asks about rivers, soils, climate, national parks, minerals and world physical features. The Economy part asks about budget terms, the RBI, banking and basic concepts. General Science is school-level Physics, Chemistry and Biology with everyday applications, and Culture covers dances, festivals, monuments and books. This page holds GK24's topic-wise GK notes for SSC CHSL, written as short facts and tables so a topic can be revised in one sitting. Read a topic, then solve its previous-year questions and quiz on this site to check what you retained.

SSC CHSL GK Questions with Answers

Q6782.Static GKEasy

The Chenab bridge, the highest railway arch bridge in the world, has been built in which state or union territory?

  1. A.Himachal Pradesh
  2. B.Uttarakhand
  3. C.Jammu and Kashmir
  4. D.Arunachal Pradesh
Show answer
Correct answer: C. Jammu and Kashmir

The bridge crosses the gorge of the Chenab in the Reasi district of Jammu and Kashmir on the Udhampur to Srinagar and Baramulla railway line, and its deck stands about 359 metres above the bed of the river, higher than the Eiffel Tower, which makes it the highest railway arch…

Q6784.Static GKMedium

The monolithic Gomateshwara statue at Shravanabelagola in Karnataka is a statue of whom?

  1. A.Mahavira
  2. B.Bahubali
  3. C.Parshvanatha
  4. D.Gautama Buddha
Show answer
Correct answer: B. Bahubali

The 57 foot statue on Vindhyagiri hill at Shravanabelagola in the Hassan district of Karnataka portrays Bahubali, also called Gomateshwara, the son of the first Jain tirthankara Rishabhanatha, and it was raised about the year 983 by Chavundaraya, a minister of the Western Ganga kingdom.

Q6787.Static GKEasy

The Statue of Unity, the tallest statue in the world, portrays which leader and stands in which state?

  1. A.Sardar Vallabhbhai Patel, Gujarat
  2. B.Mahatma Gandhi, Maharashtra
  3. C.B. R. Ambedkar, Madhya Pradesh
  4. D.Subhas Chandra Bose, West Bengal
Show answer
Correct answer: A. Sardar Vallabhbhai Patel, Gujarat

The Statue of Unity stands 182 metres high on Sadhu Bet island in the Narmada near the Sardar Sarovar dam in the Narmada district of Gujarat, was sculpted by Ram V. Sutar, and was unveiled on 31 October 2018, the birth anniversary of Patel.

Q6789.Science & TechnologyMedium

Which of the following is the defining feature of a closed loop control system?

  1. A.It has no controller
  2. B.It feeds the measured output back to the controller
  3. C.It works only on alternating current
  4. D.It cannot be programmed
Show answer
Correct answer: B. It feeds the measured output back to the controller

In a closed loop system a sensor measures what the process is actually doing, that measurement is compared with the desired value, and the controller acts on the difference, which is what a thermostat, a cruise control or a water level controller does.

Q6790.Science & TechnologyMedium

The SVAMITVA scheme uses drones mainly for which purpose?

  1. A.Spraying pesticides on crops
  2. B.Surveying inhabited village land for property cards
  3. C.Delivering vaccines to remote areas
  4. D.Patrolling the international border
Show answer
Correct answer: B. Surveying inhabited village land for property cards

SVAMITVA, launched in 2020 by the Ministry of Panchayati Raj, flies drones over the abadi or inhabited area of villages to make accurate maps, from which residents are given property cards that record their ownership and can be used to raise loans.

Q6791.Science & TechnologyMedium

SCADA, widely used in power and water systems, stands for

  1. A.Supervisory Control and Data Acquisition
  2. B.System Control and Digital Automation
  3. C.Sequential Control and Data Analysis
  4. D.Safety Control and Device Assembly
Show answer
Correct answer: A. Supervisory Control and Data Acquisition

A SCADA system gathers readings from sensors and controllers spread over a plant, a grid or a water network, shows them on screens in a control room, records them, and lets an operator send commands back, which is why it is described as supervisory control together with data acquisition.

Q6792.Science & TechnologyEasy

In industrial automation, PLC stands for

  1. A.Power Line Carrier
  2. B.Programmable Logic Controller
  3. C.Process Level Computer
  4. D.Programmed Linear Circuit
Show answer
Correct answer: B. Programmable Logic Controller

A PLC is a rugged industrial computer that reads the state of switches and sensors as inputs, runs a stored programme of logic, and switches motors, valves and lamps as outputs, so that a machine or a whole line runs by itself.

Q6793.Science & TechnologyMedium

Vyommitra, built by ISRO, is

  1. A.a weather satellite
  2. B.a half humanoid robot
  3. C.a space telescope
  4. D.a launch pad
Show answer
Correct answer: B. a half humanoid robot

Vyommitra has a head, a face, arms and a torso but no legs, which is why it is called half humanoid, and it has been built to ride an uncrewed flight of the Gaganyaan human spaceflight programme, operate switches, watch the panels and report conditions as a crew member would.

Q6794.Science & TechnologyHard

Lakshya, developed by the DRDO, is which kind of aerial vehicle?

  1. A.A pilotless target aircraft
  2. B.A passenger aircraft
  3. C.A helicopter gunship
  4. D.A reusable launch vehicle
Show answer
Correct answer: A. A pilotless target aircraft

Lakshya was developed by the Aeronautical Development Establishment of the DRDO to be flown as a target so that gun crews and missile units can practise against a realistic moving aircraft, and it is recovered by parachute.

Q6795.Science & TechnologyEasy

In the field of aviation technology, UAV stands for

  1. A.Universal Air Vehicle
  2. B.Unmanned Aerial Vehicle
  3. C.Unified Avionics Vehicle
  4. D.Upper Atmosphere Vehicle
Show answer
Correct answer: B. Unmanned Aerial Vehicle

A UAV is an aircraft with no pilot on board, flown either by a remote pilot or by its own programme, and when it is counted together with its ground control station and the radio link between them the whole is called an unmanned aircraft system.

Q6796.Science & TechnologyMedium

Which platform is the single window for drone registration and permissions in India?

  1. A.Digital Sky
  2. B.Bhuvan
  3. C.DigiLocker
  4. D.UMANG
Show answer
Correct answer: A. Digital Sky

Digital Sky is the online platform of the Directorate General of Civil Aviation on which a drone is registered and given its unique identification number, on which the airspace map with its green, yellow and red zones is published, and through which flight permissions are sought.

Q6798.Science & TechnologyEasy

The three laws of robotics were given by which writer?

  1. A.Arthur C. Clarke
  2. B.Isaac Asimov
  3. C.H. G. Wells
  4. D.Jules Verne
Show answer
Correct answer: B. Isaac Asimov

Asimov set out the three laws in his science fiction, by which a robot may not harm a human being, must obey the orders given by human beings except where that conflicts with the first law, and must protect itself except where that conflicts with the first two laws; he…

Q6800.Science & TechnologyAsked in: Uttar Pradesh · 13 Dec 2020Medium

A technology for the application of mechanical, electronics, and computer-based systems to control and operate the systems is called.

  1. A.PLC
  2. B.Sequential controller
  3. C.Microprocessor-based systems
  4. D.Automation
Show answer
Correct answer: D. Automation

Automation is the technology in which mechanical parts, electronics and computer based control are put together so that a process is controlled and operated with little human help, which is exactly the description in the question.