Which register holds the address of the next instruction to be executed?
- A.Accumulator
- B.Instruction Register
- C.Program Counter
- D.Memory Data Register
Correct answer
Explanation
The correct answer is C, Program Counter. The program counter, sometimes called the instruction pointer, always holds the memory address of the next instruction the processor will fetch, and it is incremented automatically as each instruction is taken up so that execution moves forward in order; a jump or branch instruction works simply by loading a new value into it. A is wrong because the accumulator holds the operand and the result of the current arithmetic or logical operation, not an address. B is wrong because the instruction register holds the instruction that has already been fetched and is being decoded now, which is one step behind the program counter. D is wrong because the memory data register holds the data that has just been read from, or is about to be written to, a memory location, while its companion the memory address register holds that location's address.
Read the full article: CPU and Motherboard: Architecture, Buses and Registers
Practice Questions
View allA microprocessor has eight data lines and sixteen address lines. The microprocessor is of type -
- A.8 bit
- B.16 bit
- C.20 bit
- D.32 bit
Show answer
A microprocessor is named after the width of its data bus, that is, the number of bits it can carry in and out in a single operation.
Read the full explanation →A half byte is called a
- A.Byte
- B.Nibble
- C.Bit
- D.Word size
Show answer
A byte is made up of eight bits, so half a byte is four bits, and four bits together are called a nibble.
Read the full explanation →Permanent Memory of a computer is known as-
- A.RAM
- B.CD-ROM
- C.ROM
- D.CPU
Show answer
Read Only Memory is the permanent or non-volatile memory of a computer: its contents are written once and survive when the power is switched off, which is why the BIOS firmware that starts the machine and runs the power-on self-test is stored in it.
Read the full explanation →Which of the following memories has the shortest access time?
- A.Cache Memory
- B.Magnetic Bubble Memory
- C.Magnetic Core Memory
- D.Random Access Memory
Show answer
Cache is a small quantity of very fast static RAM placed between the processor and main memory to hold the instructions and data most likely to be needed next, and of the options given it has the shortest access time; only the registers inside the processor itself are faster.
Read the full explanation →Which unit of the CPU performs arithmetic and logical operations?
- A.Control Unit
- B.Arithmetic Logic Unit
- C.Memory Unit
- D.Input Unit
Show answer
The ALU is the part of the processor that actually does the work on data: addition, subtraction, multiplication and division on the arithmetic side, and comparison along with the logical operations AND, OR and NOT on the logic side.
Read the full explanation →