Skip to content
GK24
Computer AwarenessMediumAsked in: Uttar Pradesh · UPSSSC JE 2015 General Section Official

Which of the following memories has the shortest access time?

  1. A.Cache Memory
  2. B.Magnetic Bubble Memory
  3. C.Magnetic Core Memory
  4. D.Random Access Memory

Correct answer

A. Cache Memory

Explanation

The correct answer is A, Cache Memory. Cache is a small quantity of very fast static RAM placed between the processor and main memory to hold the instructions and data most likely to be needed next, and of the options given it has the shortest access time; only the registers inside the processor itself are faster. Cache is graded as L1, L2 and L3, with L1 nearest the core and quickest. D is wrong because random access memory is the main memory and is slower than cache, which is the whole reason cache exists. B is wrong because magnetic bubble memory is an old non-volatile technology that stored data as tiny magnetised regions in a thin film and was far slower than semiconductor memory. C is wrong because magnetic core memory, built from tiny ferrite rings, was the main memory of second generation computers and had access times measured in microseconds rather than nanoseconds.

Read the full article: CPU and Motherboard: Architecture, Buses and Registers

View all
Q2.Computer AwarenessAsked in: Haryana · 9 Jan 2021, Shift 2Easy

A half byte is called a

  1. A.Byte
  2. B.Nibble
  3. C.Bit
  4. D.Word size
Show answer
Correct answer: B. Nibble

A byte is made up of eight bits, so half a byte is four bits, and four bits together are called a nibble.

Q3.Computer AwarenessAsked in: Uttar Pradesh · 5 June 2016Easy

Permanent Memory of a computer is known as-

  1. A.RAM
  2. B.CD-ROM
  3. C.ROM
  4. D.CPU
Show answer
Correct answer: C. ROM

Read Only Memory is the permanent or non-volatile memory of a computer: its contents are written once and survive when the power is switched off, which is why the BIOS firmware that starts the machine and runs the power-on self-test is stored in it.

Q5.Computer AwarenessMedium

Which register holds the address of the next instruction to be executed?

  1. A.Accumulator
  2. B.Instruction Register
  3. C.Program Counter
  4. D.Memory Data Register
Show answer
Correct answer: C. Program Counter

The program counter, sometimes called the instruction pointer, always holds the memory address of the next instruction the processor will fetch, and it is incremented automatically as each instruction is taken up so that execution moves forward in order; a jump or branch instruction works simply by loading a new…