The Swachh Bharat Mission was launched on which date?
- A.15 August 2014
- B.2 October 2014
- C.26 January 2015
- D.5 June 2015
Correct answer
B. 2 October 2014
Explanation
The correct answer is B, 2 October 2014. The mission was launched on the 145th birth anniversary of Mahatma Gandhi, whose insistence on sanitation the campaign invokes, and it runs in two wings, one for urban areas and one for rural areas. Option A is wrong because 15 August 2014 was the Independence Day speech in which the campaign was announced from the Red Fort, but the formal launch came later that year. Option C is wrong because 26 January is Republic Day and carries no connection with the sanitation mission. Option D is wrong because 5 June is World Environment Day, marked since 1973 after the Stockholm Conference of 1972, and is not the launch date of any Indian sanitation programme. Two more dates are worth carrying with this one: 2 October is observed as Swachh Bharat Diwas every year, and cities have been ranked annually under the Swachh Survekshan cleanliness survey since 2016.
Read the full article: Waste Management and Plastic: Rules, Methods and PYQs
Practice Questions
View allWhich one of the following is a biodegradable waste?
- A.Thermocol sheet
- B.Aluminium foil
- C.Vegetable peel
- D.Polythene bag
Show answer
Correct answer: C. Vegetable peel
Explanation
The correct answer is C, vegetable peel. Biodegradable waste is waste that bacteria and fungi can break down into simpler substances within a short time, and kitchen waste such as vegetable peel is the classic example; it is exactly the wet fraction that Indian cities compost or send to a biogas digester. Option A is wrong because thermocol is expanded polystyrene, a plastic that microbes cannot digest, which is why it was included among the banned single-use items. Option B is wrong because aluminium foil is a metal; it does not rot, though it can be melted and recycled again and again. Option D is wrong because a polythene bag is a plastic that only fragments into smaller pieces and finally into microplastics, and may survive in soil and water for generations. The rule to carry into the exam hall is simple: anything that once lived, such as food, paper, cotton, leaves or dung, is biodegradable, while plastic, glass, metal and thermocol are not.
Under the Bio-Medical Waste Management Rules, human anatomical waste is collected in a bin of which colour?
- A.Yellow
- B.Red
- C.Blue
- D.White
Show answer
Correct answer: A. Yellow
Explanation
The correct answer is A, yellow. The yellow category covers human and animal anatomical waste, soiled waste such as dressings and cotton contaminated with blood, expired medicines and chemical waste, and this material is destroyed by incineration, plasma pyrolysis or deep burial; nothing from the yellow bin is recycled. Option B is wrong because the red bin takes contaminated recyclable plastic, such as tubing, catheters, urine bags, intravenous sets and syringes without needles, which is autoclaved or microwaved and then shredded for recycling. Option C is wrong because the blue category is meant for broken glassware, glass vials and metallic body implants, which are disinfected, washed and recycled. Option D is wrong because white, translucent, puncture-proof containers are reserved for sharps, that is, needles, scalpels and blades. Examiners usually set this as a match-the-pair question, so remember the four colours as one set.
Plastic fragments of what size are called microplastics?
- A.Smaller than 5 millimetres
- B.Smaller than 5 centimetres
- C.Smaller than 50 microns
- D.Smaller than 5 metres
Show answer
Correct answer: A. Smaller than 5 millimetres
Explanation
The correct answer is A, smaller than 5 millimetres. Microplastics are plastic particles under five millimetres across, whether they were manufactured that small, as in cosmetic microbeads and synthetic textile fibres, or were formed when larger plastic articles weathered and broke up in sunlight and waves. Option B is wrong because five centimetres describes ordinary plastic litter, not microplastic; such pieces are visible and can still be picked up by hand. Option C is wrong because fifty microns is the scale of nanoplastics and fine fibres, far below the accepted cut-off, and no convention defines microplastics that way. Option D is wrong because a five-metre piece of plastic is macro litter such as a fishing net or a sheet. The importance of the five millimetre figure is biological: below that size plankton, fish and shellfish swallow the particles, so the plastic enters the marine food chain and comes back to human beings on the plate.
Which gas is the main constituent of the biogas produced by biomethanation of organic waste?
- A.Carbon dioxide
- B.Methane
- C.Nitrogen
- D.Sulphur dioxide
Show answer
Correct answer: B. Methane
Explanation
The correct answer is B, methane. In biomethanation, anaerobic bacteria break down organic matter inside a closed digester where no oxygen is present, and the gas they release is mainly methane, which is what makes biogas burn with a clean blue flame and gives it its fuel value. Option A is wrong because carbon dioxide is certainly present in biogas, but as the second component by volume, not the main one; it burns no further and only lowers the calorific value. Option C is wrong because nitrogen is at best a trace in biogas, coming from air leakage rather than from decomposition. Option D is wrong because sulphur dioxide is not produced in the digester; the sulphur impurity in biogas appears as hydrogen sulphide, which must be scrubbed out because it corrodes engines and pipes. The same methane forms slowly in a covered landfill, where it is called landfill gas and is either flared or tapped for power.
In the context of waste rules, EPR stands for:
- A.Environmental Protection Rules
- B.Extended Producer Responsibility
- C.Effluent Pollution Register
- D.Energy Production from Refuse
Show answer
Correct answer: B. Extended Producer Responsibility
Explanation
The correct answer is B, Extended Producer Responsibility. Under this idea a producer, importer or brand owner stays answerable for its product after the consumer has finished with it, and must arrange to collect back and recycle an agreed quantity of packaging or equipment; the plastic waste, e-waste and battery waste rules all run on it. Option A is wrong because the Environment (Protection) Act of 1986 and the rules made under it already carry their own names, and no waste rule uses the abbreviation for them. Option C is wrong because there is no statutory register by that name; effluents are regulated by consent conditions issued by the State Pollution Control Boards under the water law. Option D is wrong because energy recovery from refuse is called waste to energy or refuse-derived fuel, not EPR. Extended Producer Responsibility is best remembered as the working form of the polluter pays principle, applied to the maker rather than to the user.