Skip to content
GK24
Science & TechnologyMedium

The forbidden energy gap of silicon at room temperature is approximately:

  1. A.0.3 eV
  2. B.0.7 eV
  3. C.1.1 eV
  4. D.5.5 eV

Correct answer

C. 1.1 eV

Explanation

The correct answer is C, about 1.1 eV. The energy gap between the valence band and the conduction band decides whether a solid conducts: in silicon the gap is roughly 1.1 electron volts, small enough for heat or light to lift some electrons across it, which is what makes silicon a semiconductor. Option A is wrong because 0.3 volt is the forward barrier voltage of a germanium diode, a different quantity altogether. Option B is wrong because about 0.7 eV is the band gap of germanium, the other elemental semiconductor, and it is also the forward voltage drop of a silicon diode, which is why candidates confuse the two numbers. Option D is wrong because about 5.5 eV is the gap in diamond, an insulator. Learn the trio together: germanium 0.7 eV, silicon 1.1 eV, gallium arsenide about 1.43 eV.

Read the full article: Semiconductors and the Electronics Mission: Notes

View all
Q1.Science & TechnologyAsked in: Delhi · 22 June 2022, Shift 1Medium

If np and ne is the number of holes and electrons respectively in an intrinsic semiconductor then:

  1. A.npne = 1
  2. B.np > ne
  3. C.np = ne
  4. D.np < ne
Show answer
Correct answer: C. np = ne

In an intrinsic, that is a chemically pure, semiconductor every free electron is produced by breaking a covalent bond, and breaking a bond leaves behind exactly one hole, so electrons and holes are created strictly in pairs and their concentrations must be equal.

Q2.Science & TechnologyEasy

Which of the following impurities is added to silicon to make an n-type semiconductor?

  1. A.Boron
  2. B.Aluminium
  3. C.Phosphorus
  4. D.Indium
Show answer
Correct answer: C. Phosphorus

Silicon has four valence electrons, so adding a pentavalent atom such as phosphorus, arsenic, antimony or bismuth leaves one electron over after four bonds are formed; that spare electron is loosely held and becomes a free carrier, making electrons the majority carriers and the crystal n-type.

Q3.Science & TechnologyEasy

In a p-type semiconductor, the majority charge carriers are:

  1. A.Electrons
  2. B.Holes
  3. C.Protons
  4. D.Positive ions
Show answer
Correct answer: B. Holes

A trivalent dopant such as boron, aluminium, gallium or indium forms only three covalent bonds with the surrounding silicon atoms, leaving one bond incomplete; that vacancy behaves as a mobile positive carrier called a hole, and holes therefore become the majority carriers while thermally generated electrons remain the minority carriers.

Q4.Science & TechnologyMedium

The transistor was invented in 1947 at Bell Laboratories by which team of scientists?

  1. A.Bardeen, Brattain and Shockley
  2. B.Kilby, Noyce and Moore
  3. C.Faraday, Maxwell and Hertz
  4. D.Townes, Basov and Prokhorov
Show answer
Correct answer: A. Bardeen, Brattain and Shockley

John Bardeen, Walter Brattain and William Shockley built the first working transistor at Bell Laboratories in the United States in 1947, and the three shared the Nobel Prize in Physics in 1956 for the discovery of the transistor effect; the device replaced the bulky vacuum tube and made all later…

Q5.Science & TechnologyAsked in: RRB ALP · 21 Jan 2019, Shift 3Medium

In a bipolar transistor, alpha is the ratio of:

  1. A.collector current to emitter current
  2. B.emitter current to collector current
  3. C.base current to collector current
  4. D.collector current to base current
Show answer
Correct answer: A. collector current to emitter current

In a bipolar junction transistor the emitter injects carriers, the thin lightly doped base lets most of them through, and the collector gathers them, so the emitter current divides into a large collector current and a small base current; alpha is defined as the collector current divided by the emitter…