If np and ne is the number of holes and electrons respectively in an intrinsic semiconductor then:
- A.npne = 1
- B.np > ne
- C.np = ne
- D.np < ne
Correct answer
Explanation
The correct answer is C, the number of holes equals the number of electrons. In an intrinsic, that is a chemically pure, semiconductor every free electron is produced by breaking a covalent bond, and breaking a bond leaves behind exactly one hole, so electrons and holes are created strictly in pairs and their concentrations must be equal. Option A is wrong because a product of two concentrations cannot equal a bare number one; the product is fixed by temperature and the band gap, not by unity. Option B is wrong because holes can outnumber electrons only in a p-type crystal, which needs a trivalent dopant. Option D is wrong because electrons outnumber holes only in an n-type crystal, which needs a pentavalent dopant. Equal numbers are therefore the signature of the pure crystal, and any inequality means doping has taken place.
Read the full article: Semiconductors and the Electronics Mission: Notes
Practice Questions
View allThe forbidden energy gap of silicon at room temperature is approximately:
- A.0.3 eV
- B.0.7 eV
- C.1.1 eV
- D.5.5 eV
Show answer
The energy gap between the valence band and the conduction band decides whether a solid conducts: in silicon the gap is roughly 1.1 electron volts, small enough for heat or light to lift some electrons across it, which is what makes silicon a semiconductor.
Read the full explanation →Which of the following impurities is added to silicon to make an n-type semiconductor?
- A.Boron
- B.Aluminium
- C.Phosphorus
- D.Indium
Show answer
Silicon has four valence electrons, so adding a pentavalent atom such as phosphorus, arsenic, antimony or bismuth leaves one electron over after four bonds are formed; that spare electron is loosely held and becomes a free carrier, making electrons the majority carriers and the crystal n-type.
Read the full explanation →In a p-type semiconductor, the majority charge carriers are:
- A.Electrons
- B.Holes
- C.Protons
- D.Positive ions
Show answer
A trivalent dopant such as boron, aluminium, gallium or indium forms only three covalent bonds with the surrounding silicon atoms, leaving one bond incomplete; that vacancy behaves as a mobile positive carrier called a hole, and holes therefore become the majority carriers while thermally generated electrons remain the minority carriers.
Read the full explanation →The transistor was invented in 1947 at Bell Laboratories by which team of scientists?
- A.Bardeen, Brattain and Shockley
- B.Kilby, Noyce and Moore
- C.Faraday, Maxwell and Hertz
- D.Townes, Basov and Prokhorov
Show answer
John Bardeen, Walter Brattain and William Shockley built the first working transistor at Bell Laboratories in the United States in 1947, and the three shared the Nobel Prize in Physics in 1956 for the discovery of the transistor effect; the device replaced the bulky vacuum tube and made all later…
Read the full explanation →In a bipolar transistor, alpha is the ratio of:
- A.collector current to emitter current
- B.emitter current to collector current
- C.base current to collector current
- D.collector current to base current
Show answer
In a bipolar junction transistor the emitter injects carriers, the thin lightly doped base lets most of them through, and the collector gathers them, so the emitter current divides into a large collector current and a small base current; alpha is defined as the collector current divided by the emitter…
Read the full explanation →