Skip to content
GK24
Environment & EcologyMedium

Which device is used in industry mainly to control thermal pollution?

  1. A.Electrostatic precipitator
  2. B.Cooling tower
  3. C.Cyclone separator
  4. D.Scrubber

Correct answer

B. Cooling tower

Explanation

The correct answer is B, cooling tower. A cooling tower releases the heat of used cooling water to the atmosphere by evaporation or by air flow, so that the water leaving the plant is close to the temperature of the receiving river or lake. Cooling ponds, spray ponds and the reuse of waste heat through cogeneration work on the same principle. A is wrong because an electrostatic precipitator removes fine dust and fly ash from flue gas by charging the particles, an air pollution device. C is wrong because a cyclone separator uses the spin of the gas stream to throw out coarse particles, again an air pollution device. D is wrong because a scrubber washes gases such as sulphur dioxide out of a flue stream with a liquid or a slurry of lime.

Read the full article: Noise, Thermal and Radioactive Pollution: Limits and Units

View all
Q1.Environment & EcologyAsked in: RRB JE · 22 May 2019, Shift 2Easy

Noise pollution is measured in -

  1. A.Ohm
  2. B.Decibel
  3. C.Joule
  4. D.Ampere
Show answer
Correct answer: B. Decibel

The decibel, written dB, is the unit in which the intensity level of sound is expressed, and it is named after Alexander Graham Bell.

Q5.Environment & EcologyMedium

The immediate harmful effect of thermal pollution on a water body is:

  1. A.A rise in the dissolved oxygen content
  2. B.A fall in the dissolved oxygen content
  3. C.A rise in the salinity of the water
  4. D.A fall in the pH to below 4
Show answer
Correct answer: B. A fall in the dissolved oxygen content

The solubility of a gas in water decreases as the temperature of the water rises, so hot water discharged from a power station holds less dissolved oxygen.