The distance between two consecutive threads of a screw is called its:
- A.Pitch
- B.Lead angle
- C.Torque
- D.Velocity ratio
Correct answer
Explanation
The correct answer is A, pitch. The pitch of a screw is the distance between two consecutive threads measured along its axis, and it is also the distance through which the screw advances in one complete turn; the velocity ratio of a screw is the circumference of the circle described by the handle divided by the pitch, so a finer thread gives a larger mechanical advantage. Option B is wrong because the lead angle is the angle the thread makes with a plane at right angles to the axis and is not a distance. Option C is wrong because torque is the turning effect of a force, measured as force multiplied by the perpendicular distance from the axis. Option D is wrong because the velocity ratio is a pure number calculated from the pitch, not the distance between threads itself.
Read the full article: Simple Machines: Levers, Pulleys, Formulas and PYQs
Practice Questions
View allThe effort applied to move a load is 15 units and the mechanical advantage is observed to be 3. Find the load.
- A.5 units
- B.3 units
- C.15 units
- D.45 units
Show answer
Mechanical advantage is defined as the load divided by the effort, so the load is the mechanical advantage multiplied by the effort, that is three multiplied by fifteen, which gives forty-five units.
Read the full explanation →Find the efficiency of a pulley system which has a mechanical advantage of 2.5 and where the load lifts by 2.5 metres on pulling the rope by 10 m.
- A.62.50%
- B.25.00%
- C.40.00%
- D.100.00%
Show answer
The velocity ratio is the distance moved by the effort divided by the distance moved by the load, that is ten divided by two point five, which is four.
Read the full explanation →The velocity ratio of a simple machine is the ratio of distance travelled by the ________ to the distance travelled by the ________ in the machine.
- A.load; load
- B.effort; load
- C.load; effort
- D.effort; effort
Show answer
Velocity ratio is defined as the distance moved by the effort divided by the distance moved by the load in the same interval of time, and because it depends only on the design of the machine it does not change with friction, unlike the mechanical advantage.
Read the full explanation →Which of the following mechanical devices efficiently distributes or multiplies loads with little effort?
- A.Gears
- B.Lever
- C.Shafts
- D.Bearings
Show answer
A lever is a rigid bar turning about a fulcrum, and by the principle of moments the load multiplied by the load arm equals the effort multiplied by the effort arm, so a long effort arm lets a small effort balance a large load; this is the simplest way of…
Read the full explanation →A wheelbarrow is an example of which class of lever?
- A.First class
- B.Second class
- C.Third class
- D.It is not a lever
Show answer
In a wheelbarrow the wheel acts as the fulcrum, the load sits in the tray between the wheel and the hands, and the effort is applied at the handles, which is the arrangement of a second class lever; because the effort arm is always longer than the load arm, its…
Read the full explanation →