Fibre cables used for "Fibre to Home" installations are _______.
- A.multimode graded
- B.multimode step
- C.multiaxis
- D.single mode
Correct answer
Explanation
The correct answer is D, single mode. A fibre-to-the-home connection runs from the operator's equipment to the subscriber's premises over a distance of kilometres, and for such runs single-mode fibre is used: its core is only a few micrometres wide, so light travels along one path, there is no spreading of the pulse from different paths arriving at different times, and both loss and distortion stay very low. Options A and B are wrong because multimode fibre, whether of the graded-index or the step-index kind, has a wider core and carries many paths at once; it suffers modal dispersion and is therefore used only over short distances, such as within a building or a data centre. Option C is wrong because there is no category of fibre called multiaxis. Fibre of this kind is also the backhaul that 5G towers depend on.
Read the full article: Telecom 4G, 5G and 6G: Generations, Spectrum, Fibre
Practice Questions
View all5G mobile services were commercially launched in India in which year?
- A.2018
- B.2020
- C.2022
- D.2024
Show answer
Commercial 5G services began in India on 1 October 2022, when they were launched at the India Mobile Congress in New Delhi, following the spectrum auction held earlier that year in the 600 MHz, 700 MHz, 3300 MHz and 26 GHz bands among others.
Read the full explanation →Which ITU standard family corresponds to 5G?
- A.IMT-2000
- B.IMT-Advanced
- C.IMT-2020
- D.IMT-2030
Show answer
The International Telecommunication Union names each generation of mobile telephony by a standard family, and 5G is IMT-2020, whose requirements include a peak downlink rate of 20 Gbps, a user experienced rate of 100 Mbps, one millisecond of air interface latency and a million connected devices in a square kilometre.
Read the full explanation →In 4G mobile networks, LTE stands for:
- A.Long Term Evolution
- B.Linear Transmission Encoding
- C.Low Traffic Ethernet
- D.Local Transfer Exchange
Show answer
LTE is the radio technology through which 4G was delivered; the name was chosen because it was presented as the long-term evolution of the earlier 3G standards rather than a break with them.
Read the full explanation →The peak downlink data rate target set for 5G under IMT-2020 is:
- A.1 Gbps
- B.10 Gbps
- C.20 Gbps
- D.100 Gbps
Show answer
Under IMT-2020 the peak downlink data rate for 5G is set at 20 gigabits a second, with 10 gigabits a second in the uplink; these are laboratory peaks under ideal conditions, not the speed a subscriber sees, and the separate target for the user experienced rate is 100 megabits a…
Read the full explanation →Which of the following is NOT one of the three service categories defined for 5G?
- A.Enhanced mobile broadband (eMBB)
- B.Ultra-reliable low-latency communication (URLLC)
- C.Massive machine-type communication (mMTC)
- D.Circuit-switched voice bearer (CSVB)
Show answer
The three categories actually defined are given in the other options.
Read the full explanation →